Su-27 - 815mm — FlightTek RC

$Su-27 - 815mm$

Jet · LW-PLA Frame

Su-27 - 815mm

Our 3D printed Su-27 Flanker is a scale-inspired RC jet with an 815mm wingspan. The 3d thrust vectoring gives this plane absolute control even at low speeds.

Specifications

Wingspan815mm

Length720mm

MaterialLW-PLA/PLA

EDF size64mm X 2

RTF Weight~2.2 kg

Battery4000-5000mah 4-6s

Select Configuration

STL Files

$45

Full access to all the STL files needed to print the plane

All STL files
Assembly instructions PDF

Kit - No Electronics

$175

Printed parts plus hardware. Just add your own motor, ESC, servos, and receiver.

All printed parts
Push rods & control horns
Screws & hardware pack
All STL files
Assembly instructions PDF

Full Kit - PNP (Unpainted)

$415

Fully assembled and tested. Just bind your receiver and fly.

All printed parts & hardware
Two 64mm EDFs
Two 70A ESCs
7 x 9g metal geared servos
Pre-installed linkages
All STL files
Assembly instructions PDF

Full Kit - PNP (Painted)

$485

Fully assembled and tested. Just bind your receiver and fly. Painted by hand, in house.

All printed parts & hardware
Two 64mm EDFs
Two 70A ESCs
7 x 9g metal geared servos
Pre-installed linkages
All STL files
Assembly instructions PDF

Selected configuration

STL Files

$45